180K-TBG
Add Zip code to check availability
Select Quantity
Features
Evapoler
EV-005
Electrical & Energy
Industrial Cooler
Additional Information
Marketplace Benefits
Year-long Helpdesk
Verified Sellers
Easy Payment
Warranty & Return Policy
Warranty Policy
Return Policy
Description
The 180K-TBG is designed as an industrial mobile/portable evaporative cooler suitable for large-spaces requiring high fresh-air cooling. According to the manufacturer, it is part of their mobile cooler line. The “180K” denotes the ~18,000 m³/h airflow class.
In essence, the cooler works by drawing ambient outside air through high-efficiency honeycomb cooling pads, water is pumped to keep the pads wet, and as air traverses the pads evaporation takes place, cooling the incoming air, which is then pushed into the space by large axial fan(s). It’s meant for industrial/commercial environments where ventilation + cooling is needed rather than a standard conditioned closed indoor space.
Key Specifications & Features
Here are the salient details for the 180K-TBG:
Airflow: ~ 18,000 m³/h (≈ 18,000 cubic metres per hour) for the single‐phase model.
Static pressure: ~ 190 Pa.
Motor/output power: ~ 1.1 kW (i.e., approx 1,100 W) for the model listed.
Voltage/frequency: 220 V, 50 Hz (single phase) for the version cited.
Noise level: ≤ 76 dBA (as per one listing) for this model.
Dimensions (L×W×H): approx 1,210 × 1,150 × 950 mm for one variant.
Vent size (L×W): 647 × 647 mm for one version.
Net weight: 100 kg; Operating weight ~130 kg.
Water tank capacity: ~ 200 litres.
Fan type: Axial. Single phase, single speed (for listed variant).
Features & build:
Wired remote controller with push buttons.
High efficiency honeycomb cooling pads with higher saturation levels.
Non‐clogging type water distributor to ensure uniform wetting of the pads.
100% copper-wound electric motor for durability; aluminium casing for efficient heat dissipation.
Pre‐dust filters to ensure dust-free fresh air and prolong pad life.
Drain valve to ensure water drainage at regular intervals (prevent scale/algae).
Float valve to maintain water level automatically.
Rust-free polypropylene polymer casing for long life in industrial settings.
Benefits & Suitable Use-Cases
High fresh-air volume: With 18,000 m³/h airflow, the 180K-TBG is well‐suited to spaces like large workshops, industrial halls, manufacturing units, gymnasiums where ventilation plus cooling is needed.
Portable/Mobile nature: Being an “industrial mobile” cooler (as per listing) means it may be mounted on wheels or designed to be relocated more easily than fixed duct-units. This adds flexibility in industrial operations.
Lower energy consumption compared to refrigerant AC (in suitable conditions): Because it relies on evaporative cooling (water + pads) rather than refrigeration, for dry/hot ambient conditions it can be more economical.
Effective dust/fume removal + fresh air intake: Since it draws outside fresh air through pre‐filters and pads, helps improve indoor air quality and ventilation—a plus in dusty/manufacturing environments.
Robust industrial build: The copper motor, aluminium casing, polymer body, dust filters and large tank show the unit is built for demanding environments rather than light home/office use.
Considerations & Installation Tips
Ambient humidity matters: Evaporative cooling works best when outside air is relatively dry. If the air is already humid (for instance in monsoon season or highly humid climates), the cooling drop will reduce. Thus in Greater Noida / Uttar Pradesh you should check conditions and plan accordingly.
Exhaust or air‐outflow needed: Since the unit introduces cooled but humidified fresh air, the space must allow humid/stale air to escape (via vents, doors, windows) so that humidity doesn’t build up and reduce comfort.
Sizing relative to space & load: The spec gives airflow; you need to ensure the space’s volume, heat gains (equipment, people, lighting) are matched. Even with 18,000 m³/h that might not be sufficient if the heat load is very high or the space has poor insulation/ventilation.
Placement & clearance: The unit size (~1.21 × 1.15 × 0.95 m) means you must ensure adequate clearance for maintenance, pad access, water tank, pump access. Also positioning such that air distribution is optimal (not blocked) is key.
Water supply & maintenance: The unit uses water (tank 200 L) and has features like drain valve, float valve, pump. Regular maintenance is needed: cleaning pads, ensuring the distributor is not clogged, draining/cleaning tank periodically to prevent algae, ensuring pre‐filters are cleaned.
Electrical supply & wiring: The listed model is single phase 220 V/50 Hz; ensure your site has compatible supply, wiring, breaker protection. Check current draw (5.6 A listed) from spec.
Noise & fan impact: Although ≤ 76 dBA is specified, in large industrial spaces with many units or in quieter zones you should consider noise levels and mounting/insulation accordingly.
Mobility vs fixed ducting: Since it’s described as a “mobile” cooler, if you intend to use ducting or fixed installation, ensure the static pressure (190 Pa) is sufficient for your duct design (length, bends, resistance). If long ducts or high static losses are present, you may need a higher static pressure unit.
